Quality is life, service is the tenet
發布時間: 2024-08-14
產品型號: BDJC-50KV
廠商性質: 生產廠家
所 在 地: 北京市海淀區上地科技園上地十街1號
產品特點: 絕緣電壓擊穿強度試驗儀
絕緣電壓擊穿強度試驗儀使用和保養
絕緣電壓擊穿強度試驗儀比較精密的阻抗測量儀器,在合理使用和注意保養情況下,才能保證長期穩定和較高的測試精度。
a.熟悉本說明書,正確地使用儀器;
b.使儀器經常保持清潔、干燥;
c.本儀器保用期為18個月,如發現機械故障或失去準確度,可以原封送回本廠,免費修理。
注意事項:
●本儀器試驗過程中如空氣相對濕度大于70%,兩電極間空氣放電的距離會增加很多所以試驗中請與儀器保持1.2米的距離。
●本儀器之控制計算機專為電壓擊穿試驗機設計,請勿隨意添加和刪除程序或移作它用。
●本公司保留對設備改進的權利,并不另行通知用戶。
技術指標:
01、輸入電壓: 交流 220 V
02、輸出電壓: 交流 0--100 KV ;
直流 0—100 KV
03、電器容量: 10KVA
04、高壓分級: 0-100KV
05、升壓速率:0.01-5.0kv
(備注:滿足標準要求并可以根據用戶需求設定不同的升壓速率)
06、試驗方式:
直流試驗:1、勻速升壓 2、梯度升壓 3、耐壓試驗
交流試驗:1、勻速升壓 2、梯度升壓 3、耐壓試驗
07、試驗介質:空氣,試驗油
08、安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.05S內切斷電源。
09、儀器配備*故障報警系統 避免用戶操作故障儀器發生危險。(上位機報警和下位機報警)
主機尺寸:長寬高-800*700*1600(MM)
操作臺尺寸:長寬高-800*700*650(MM)
防護罩材質:白色透明有機玻璃
油槽尺寸:長寬高-300*200*150
設備重量:約100KG
產品特點
1、運行于WIN XP/WIN7/WIN8系統下的獨立安裝軟件,界面友好,操作簡單
2、實驗顯示曲線,數據自動儲存,自動查找
3、多種用途可以進行交、直流試驗試驗準確、可靠、安全
4、計算機控制試驗過程,自動判斷停止,自動復位
5、超壓、過流、短路、漏電、誤操作等多種保護
、
電壓擊穿試驗儀滿足標準:
GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 /GB12656 /ASTM D149 .
GB1408-2006 絕緣材料電氣強度試驗
GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗
GB/T3333 電纜紙工頻電壓擊穿試驗
HG/T 3330絕緣漆漆膜擊穿強度測定
GB12656 電容器紙工頻電壓擊穿試驗
ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度試驗
Insulation voltage breakdown strength tester use and maintenance
Insulation voltage breakdown strength tester is the impedance of the precision measuring instruments, under the condition of reasonable use and pay attention to maintenance, to ensure the long-term stability and high precision.
A. Be familiar with this manual, the proper use of the instrument;
B. make often maintain clean, dry instrument;
C. the instrument warranty period for 18 months, such as mechanical failure or loss of accuracy, can be intact back to our factory, repair free of charge.
Insulation voltage breakdown strength tester to note:
When the instrument test such as air relative humidity is more than 70%, in the process of air discharge distance between two electrodes increases a lot so experiment instrument to keep a distance of 1.2 meters.
When the instrument is specially designed for the control of computer breakdown voltage tester design, please do not add and remove programs or for it.
The company reserves the right to equipment improvement, did not notice the user.
Insulation voltage breakdown strength tester technical indicators:
01, input voltage: ac 220 V
02, output voltage: communication 0-100 KV;
Dc 0-100 KV
03, electric capacity: 10 kva
04, high-pressure sizing: 0-100 kv
05, pressure rise rate: 0.01 to 5.0 kv
(note: meet the standard requirements and can be set according to user requirements of different rate of pressure rise)
06, test mode:
Dc test: 1, 2, gradient booster 3 uniform booster, withstand voltage test
Communication test: 1, 2, gradient booster 3 uniform booster, withstand voltage test
07, test medium: air, oil test
08, installation, high sensitivity of over current protection device to ensure the sample breakdown within 0.05 S when cut off power supply.
09, instrument equipped with advanced fault alarm system Avoid user operation fault instrument. Alarm (the upper machine and lower machine alarm)
Host size: dimensions - 800 * 700 * 700 (MM)
Work station size: dimensions - 800 * 700 * 700 (MM)
Shield material: white transparent organic glass
Tank size: dimensions - 300 * 200 * 150
Weight: about 100 kg
Product features
1, run on Windows XP/Windows 7 / doing under the system of independent software installation, friendly interface, easy to operate
2, experiments show that curve, data storage automatically, automatic search
3, a variety of utility can be ac and dc test experiment was carried out accurate, reliable and safe
4, the computer control test process, automatic stop, automatic reset
5, overpressure, over current, short circuit, leakage, wrong operation and so on the many kinds of protection
,
Breakdown voltage tester meet standard:
GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 / GB12656 / ASTM D149.
Insulation dielectric strength test GB1408-2006
GB/T1695-2005 rubber breakdown strength and power frequency voltage withstand voltage strength test
GB/T3333 cable ZhiGong frequency voltage breakdown test
HG/T 3330 insulating varnish film breakdown strength measurement
GB12656 ZhiGong frequency capacitor voltage breakdown test
ASTM D149 solid electrical insulating materials in the industrial power frequency of dielectric breakdown voltage and dielectric strength test